Innacomm Wireless W3100 Modem Router Single-Port ADSL 2+ Wireless Router

Innakomm is a DSL Modem/ Wireless Router supplied by Telekom Malaysia when you subscribe to TM Net Streamyx packages.

Login to http://192.168.1.1 with the username and password

username: tmuser
password: tmuser

Note:
If you cannot logon using the user name and password combinations provided above, you may need to reset the modem by long-pressing the ‘reset’ button to the default factory setting.

after login, you'll see this:

1. Connection Type: select PPPOE

2. Streamyx Account : put your username and password. Login Name = yourname@streamyx
Password = your password


3. Wireless Configuration : tick "Enable Wireless"

Wireless Network Name (SSID): put your any preferred SSID.

Wireless Channel : AUTO

Wireless Security : WEP , then click "SET WEP key". (can put 5chars. eg: 12345)

4. save your settings. don't forget to click commit/reboot as well.

It works as a modem by default but you can configure it to become a router.

In router mode, you don’t need to dial to login to Streamyx anymore. The router will dial it for you automatically.

 

Login to http://192.168.1.1 with the username and password

1) username: tmadmin
password: tmbusiness

Configure to Router mode

1. When logged in, click on the WAN tab.
   
    
2. Under the WAN tab, select PPP and then select ADD to add in a new PPP configuration as follow:
   
   PPP Interface = ppp-0
   ATM VC = aal5-2 or equivalent ( VPI=0, VCI=35 setting)
   Interface Sec Type = Public
   Status = Start
   Protocol = PPPoE
   Use DHCP/DNS = Enable
   Security Protocol = PAP
   Login Name = yourname@streamyx
   Password = your password
    
3. Under the Services tab, select NAT, and set it to Enable.
    
4. Under the Services tab, select IP Filter, make sure the Public and Private is set to Accept, and this would allow the modem to access the Net.
   
   After that, click on “Admin” and then “Commit” and then “Reboot”.
    
5. Set every PCs TCP/IP in your LAN to point to the modem as the gateway.
   
   IP Address = 192.168.1.x  ( where x ranges from 2-254)
   Subnet mask = 255.255.255.0
   Default Gateway = 192.168.1.1.
   
   Preferred DNS Server = 202.188.0.133
   Alternate DNS Server = 202.188.1.5
    
6. Once it’s done you should check your Internet connectivity by loading your favourite website.